Sandbags
SoluForm Pre-filled Sandbags
SoluForm Sandbags are indispensable in flood control and erosion protection. Sandbags provide a critical barrier solution against rising waters. Historically Sandbags were used as military fortifications and later evolving into essential tools for civilian infrastructure.
- Flood Control and Erosion Protection
- Traffic Management
- Trench and Excavation Safety
- Embankment Stabilisation
- Retaining Wall Construction
SoluForm Sandbags
SoluForm Sandbags for use in flood control and erosion protection. Today, robust polyester sandbags filled with screened silica sand offer superior strength and versatility. They combine traditional utility with enhanced durability and functionality.
Our 20kg sandbags are manufactured using a needle punched 150gms non-woven polyester fabric consisting of randomly orientated synthetic staple fibres.
Approximate filled bag dimension:
650mm x 300mm x 100mm, with one end stitched closed.
The empty bag size is:
770mm x 370mm providing room to ensure the sand is malleable.
The fabric of the sandbag is dark green in colour, is light weight yet tough and is non-biodegradable.
In addition to the UV resistant properties of polyester, the fabric is furthermore protected by additional UV resisting additives, making the fabric resistant to degradation from its exposure to sunlight.
Our bagwork is prefilled on an automated line, meaning the bagwork arrives to site ready to place, therefore no requirement to hand fill bagwork yourself. This ensures a consistent and quality controlled end product, with the bagwork product then covered under our ISO 9001 and 14001 quality system.
SoluForm Sandbags for use in flood control and erosion protection.
SoluForm Pre-filled Sandbags Benefits:
- Simple to Use
- Cost Effective
- Pre-filled and Ready to Use
- Time Saving
- Strong and Durable
- Consistent Size and Shape
Product Specification
| Typical finished block dimensions: | 650 x 300 x 100mm |
| Typical weight: | 20kg per filled sandbag |
| Yield per pallet: | 0.8m3 |
